Auto One-end Terminal Crimping And Inserting Connector Machine, Wire Cutting Stripping Tinning Machine

Product Categories

Capacitor Lead Cutting [9]
Radial Lead Cutting Machine [2]
LED Lead Cutting [7]
Radial/Axial Lead Forming Machine [1]
Transistor Cutting [6]
Wire Cut and Strip Machine [4]
Auto Housing Insertion Machine [8]
Taped Components Cutting [4]
Other Components Cutting [3]
Wire Crimping Machine [4]
Capacitor Lead Forming [7]
Tube/Strip Cutting Machine [13]
LED Lead Forming [12]
Winding and Bundling [2]
Transistor Forming [19]
Wire Processing Auxiliary equipment [2]
Screwdriver With Feeder [4]
Tape&reel Radial Lead Forming [7]
Resistor/Diode Forming [26]
Robot Glue Dispenser [1]
IC And Jumper Wire Forming [8]
PCB Separator& PCB lead Cutting Machine [3]
Pneumatic Forming Machine [5]
Wire Twister/ Wire Splicing [1]
SMD Components Counter [8]
Wire Cut And Strip [27]
Wire Stripping Machine [13]
Auto Soldering Machine [6]
Coaxial Cable Stripping [13]
Auto Wire Tin Dip Machine [5]
Other Machines [6]
Wire Cut Strip And Bend [2]
Wire Strip& Crimp [6]
Two-end Crimp [9]
One-end Crimp [6]
Wire Terminal Crimp [11]
Combined Wire Crimping [2]
Crimp Applicators [9]
RJ45/RJ11 Crimp Machine [3]
Automobile Cable Procesing [7]
New Energy Cable Procesing [8]
Soft Tube Cutting [15]
Velcro/Film/Strip Cutting [12]
Hot Knife Cutting [3]
Pin header cutter [2]
Wind And Bind [14]
Cable Tie Tying [4]
Wire Prefeeder [10]
Wire Taping [3]
Push-Pull Force Tester [3]
Wire Labeling&Marking [3]
Heat Shrink Heating [2]
Dual-Platform Screwdriver Robot [9]
One-Platform Screwdriver Robot [5]
Handheld Screw Driving [8]
Z Axis Screw Machine [3]
Customized Screwdriver Machine [5]
Basic Glue Dispenser [15]
Two-Part Epoxy Dispenser [7]
Hot Melt Glue Dispenser [2]
PCB Depanel [8]
PCB Lead Cutting [6]
Wire Twister [20]
Wire Splicing [3]
Packing Machine [8]
Customized Assembly Machine [7]
Vibration Feeder Bowl [7]
Wire Harness Welding [2]
Floor-Stand Screwdriver Machine [2]

RKENS TECHNOLOGY CO.,LTD

Contact Now

Auto One-end Terminal Crimping And Inserting Connector Machine, Wire Cutting Stripping Tinning Machine

Name: Auto Oneend Terminal Crimping And Inserting Connector Machine Wire Cutting Stripping Tinning Machine
Brand: RKENS
Price: 1 USD

Brand Name : RKENS

Model Number : RS-005

Place of Origin : China

Contact Now

Auto One-end Terminal Crimping And Inserting Connector Machine, Wire Cutting Stripping Tinning Machine

Intro:

This machine can cut wires, strip both ends, one-end twist and dip tin solder, another-end press terminals and insert the plastic housing connectors. This is a full automatic machine. All process can be finished by one machine.

Note: This machine is customized. You can not change termials and connectors.

Machine video: https://youtu.be/bbb-Sh8slEI

Parameters:

Function	Wire cutting, single-end stripping, single-end termination, single-end plastic housing; the other end is half-stripped/fully stripped, twisted, and tinned
Power Supply	Power supply: AC 220V/110V 50 / 60HZ
Optional Feature	CCD detection, pressure detection, twist wires together
Detect function	Whether there are wires, whether the wires are knotted, whether there are terminals, whether there are plastic shells, air pressure alarm, motor abnormality, etc.
Speed	8000-9000 terminal quantity
Cut length	30MM-800MM (can be customized)
Air Source	0.6-0.8MPa (clean and dry air source is required)
Available Wire	32AWG-18AWG
Rear Side Strip length	1-9MM (half or full stripping)
Dip Tin length	1MM-9MM
Size	3800 × width 1800 × height 2200 (MM)
Weight	about 550kg (gross weight after packing the wooden box: about 760KG)

Features:

The integration of automatic wire feeding, cutting, peeling, twisting, end punching, shell insertion and quality monitoring has been realized;
A variety of plastic shells only need to replace a few modular replacement fixtures, which is simple and convenient;
It is suitable for the processing of various wire materials such as electronic wire, flat wire, parallel wire, halogen-free wire, silicone wire, Teflon wire, braided wire, etc.
Suitable for 1.0 terminal, 1.25 terminal, 1.5 terminal, PH, XH, VH series terminal, etc.;
Servo control, pneumatic components, guide rails, etc. use world-renowned brands to ensure the overall performance of the equipment is stable;
Optional terminal pressure management device, CCD visual image system, easy operation and quality assurance;
Adopting touch screen man-machine interface, parameter adjustment is convenient, operation is simple and flexible;
With strong research and development capabilities, it can intelligently upgrade and expand equipment functions.

Auto One-end Terminal Crimping And Inserting Connector Machine, Wire Cutting Stripping Tinning Machine

Auto One-end Terminal Crimping And Inserting Connector Machine, Wire Cutting Stripping Tinning Machine Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	RKENS TECHNOLOGY CO.,LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!